One-time splitting machine, mold life is over 500,000 times,
Easy mold replacement and high safety
Suitable for batch die-cutting of circuit boards for mobile phones, digital cameras, electronic accessories, computers, automobiles, etc.
Install the splitting die on the punching machine, put the FPC and PCB board to be cut in the corresponding position of the lower die, press the start switch to perform one-time splitting, and the lower die adopts automatic push-pull during work, which reduces labor intensity and improves safety. It is very convenient to take and place the finished product at the same time. | Stamping And Splitting Machine
1. Independent research and development design;
2. Adopt PLC touch screen Chinese and English operation interface;
3. The structure is compact in design, super rigid, easy to operate and safe to use.
4. The mold can be replaced according to different products, and the mold change is convenient and simple.
5. The lower die automatically enters and exits, and it is convenient to take and place the product, and the finished product can fall into the drawer.
6. Minimize the internal stress during cutting and avoid tin cracking.
7. The efficiency of punching semi-finished PCB, FPC and aluminum substrates is extremely high.
8. This machine is suitable for the puzzle of stamp holes.
1. Mold accuracy: the cutting accuracy is plus or minus 0.1mm.
2. The working method of the equipment: the microcomputer man-machine interface is used for automatic slitting, and the lower die is automatically in and out.
3. Pneumatic type: The principle of cylinder lever is adopted, and the cutting force is balanced.
4. Hydraulic type: the straight-down type is adopted, and the cutting force is large.
5. Electronic control accessories: using microcomputer LCD control, the equipment is stable and no after-sales.
6. Safety performance: The machinery is protected by safety doors and gratings to ensure the safety of operators.
7. Time to replace the mold: complete the installation of the mold within five minutes.
8. The life of the mold: more than 500,000 times.
9. The scope of mechanical use: FPC, PCBA board, aluminum substrate and other panel boards.
1. Double switch hands action start.
2. The equipment is equipped with a slide in and out of the lower die, and the lower die enters and exits automatically, making it convenient and safe to pick and place products.
3. Set the emergency stop switch to stop the machine in time when problems are found.
4. Set up a safety door to avoid the mistaken entry of hands when installing and debugging the mold. (No safety door does not work during normal operation)
5. Set up a shot-stopping device at the safety door, the wrong plate is placed on the mold, the shot-shot device can sense errors, and the mold cannot enter.
6. Safety air pressure setting function, over-limit alarm. Automatic counting, over-limit shutdown.
7. Minimize the internal stress during cutting and avoid tin cracking
8. High efficiency for punching semi-finished PCB and FPC
One-time splitting machine, mold life is over 500,000 times,
Easy mold replacement and high safety
Suitable for batch die-cutting of circuit boards for mobile phones, digital cameras, electronic accessories, computers, automobiles, etc.
Product advantages: 1. Stress free cutting 2. MARK point precise positioning 3. Imported color high-definition industrial cameras, flight cameras 4. Equipped with automatic tool changing mechanism 5. Imported high-s
Product advantages: 1. Stress free cutting; 2. MARK point precise positioning; 3. Imported color high-definition industrial cameras; 4. Imported high-speed electric spindle; 5. Equipped with broken knife detection f
.png?imageView2/1/format/webp)
Product advantages: Suitable for any shape cutting, no dust during processing, thin cutting seam, small heat affected zone Scope of application: It is suitable for micro-processing of various materials, including th
Product advantages: 1. High degree of automation; 2. Saw blade cutting can effectively reduce the stress of splitting; 3. Automatically find the mark point machine vision function; 4. The vacuuming method has side su
Product advantages: Two-way cutting, compact structure design, quick and simple change of touch, high safety, data monitoring system Scope of application: Suitable for LED industry, SMT industry, various elect
